67
Menu Options
Parameter Explanation/Value
Bellows
(Bellows)
“F.L+B (Fixed
Low+Bellows)”: The
velocity is controlled by
bellows movement at the
moment you play a key.
However, the velocity
value will not be lower
than 20 (0x14).
“F.M+B (Fixed
Med.+Bellows)”: The
velocity is controlled by
bellows movement at the
moment you play a key.
However, the velocity
value will not be lower
than 50 (0x32).
“F.H+B (Fixed
High+Bellows)”: The
velocity is controlled by
bellows movement at the
moment you play a key.
However, the velocity
value will not be lower
than 80 (0x50).
MIDI TX
(MIDI Tx)
Pressing the [ENTER/YES] button lets you
make MIDI TX settings for the drum part.
Bass Link1–3
This specifies the drum sound that is played by the bass rows of the
left hand button keyboard, and specifies its volume.
You can specify up to three types of drum sound for the bass rows
of the left hand button keyboard, and play up to three types of
drum sound simultaneously.
Different drum sounds can be specified independently for the bass
rows and the chord rows of the left hand button keyboard.
For example, you can assign a bass drum to sound for the bass rows
and a snare drum to sound for the chord rows.
Parameter Explanation/Value
Note On
(Note On)
Selects the sound (instrument) that is
heard when you play the bass rows of the
left hand button keyboard.
At this time you can play the left hand
button keyboard to audition the sound.
If you choose “Off,” the drum sound is
not heard when you play the bass rows of
the left hand button keyboard.
For details regarding the single
instrument of each Drum Set refer to the
“Tone & Drum Kit List” supplementary
manual.
&
http:/ www.roland.com/manuals
NOTE
Depending on the drum set, some numbers
have no sound assigned to them. If you
select one of these numbers, there will be
no sound.
Off, 1–128: (instrument
name)
Parameter Explanation/Value
NtOn Vol
(Note On Volume)
It allows you to create the desired
volume balance for the drum instrument
selected.
This is a relative parameter: its value is
added to or subtracted from the standard
value (“Std”).
–100–Std–+100
Note Off
(Note Off)
Selects the sound (instrument) that is
heard when you release the bass row of
the left hand button keyboard.
At this time you can play the left hand
button keyboard to audition the sound.
If you choose “Off,” the drum sound is
not heard when you play the bass rows of
the left hand button keyboard.
For details regarding the single
instrument of each Drum Set refer to the
“Tone & Drum Kit List” supplementary
manual.
&
http:/ www.roland.com/manuals
NOTE
Depending on the drum set, some numbers
have no sound assigned to them. If you
select one of these numbers, there will be
no sound.
Off, 1–128: (instrument
name)
NtOffVol
(Note Off Volume)
It allows you to create the desired
volume balance for the drum instrument
selected.
This is a relative parameter: its value is
added to or subtracted from the standard
value (“Std”).
–100–Std–+100
Chord Link1–3
This specifies the drum sound that is played by the chord rows of
the left hand button keyboard, and specifies its volume.
You can specify up to three types of drum sound for the chord rows
of the left hand button keyboard, and play up to three types of
drum sound simultaneously.
Different drum sounds can be specified independently for the bass
rows and the chord rows of the left hand button keyboard.
For example, you can assign a bass drum to sound for the bass rows
and a snare drum to sound for the chord rows.
To Next Page
Loading...
