Roland FR-4X - Page 68

68
Menu Options
Parameter Explanation/Value
Note On
(Note On)
Selects the sound (instrument) that is
heard when you play the chord rows of
the left hand button keyboard.
At this time you can play the left hand
button keyboard to audition the sound.
If you choose “Off,” the drum sound is
not heard when you play the chord rows
of the left hand button keyboard.
For details regarding the single
instrument of each Drum Set refer to the
“Tone & Drum Kit List” supplementary
manual.
&
http:/ www.roland.com/manuals
NOTE
Depending on the drum set, some numbers
have no sound assigned to them. If you
select one of these numbers, there will be
no sound.
Off, 1–128: (instrument
name)
NtOn Vol
(Note On Volume)
It allows you to create the desired
volume balance for the drum instrument
selected.
This is a relative parameter: its value is
added to or subtracted from the standard
value (“Std”).
–100–Std–+100
Note Off
(Note Off)
Selects the sound (instrument) that is
heard when you release the chord row of
the left hand button keyboard.
At this time you can play the left hand
button keyboard to audition the sound.
If you choose “Off,” the drum sound is
not heard when you play the chord rows
of the left hand button keyboard.
For details regarding the single
instrument of each Drum Set refer to the
“Tone & Drum Kit List” supplementary
manual.
&
http:/ www.roland.com/manuals
NOTE
Depending on the drum set, some numbers
have no sound assigned to them. If you
select one of these numbers, there will be
no sound.
Off, 1–128: (instrument
name)
NtOffVol
(Note Off Volume)
It allows you to create the desired
volume balance for the drum instrument
selected.
This is a relative parameter: its value is
added to or subtracted from the standard
value (“Std”).
–100–Std–+100
MIDI TX
These are parameters for MIDI transmission.
Parameter Explanation/Value
Bass
(Bass)
Set this parameter to “On” if you want
that the note played in the BASS row
board are transmitted by FR-4x MIDI OUT
jack.
With the “Off ” setting, note messages are
not transmitted.
Off, On
Chord
(Chord)
Set this parameter to “On” if you want
that the note played in the CHORD row
board are transmitted by FR-4x MIDI OUT
jack.
With the “Off ” setting, note messages are
not transmitted.
Off, On