Roland FR-4X - Convenient Functions (Utility); Copying a Set to Another Set (Copy SET)

87
Menu Options
Convenient Functions (Utility)
Here you can copy, export, or import sounds, add expansion
sounds, and perform a factory reset.
Display Function
Copy SET
This parameter allows you to copy
the settings of one Set to another Set
memory.
&
“Copying a Set to Another Set
(Copy SET)” (p. 87)
Copy EFX
This parameter allows you to copy the
settings of the desired effects processors
from one Set to another.
&
“Copying Settings of a Set to
Another Set (Copy EFX)” (p. 88)
Copy REG
This parameter allows you to copy
the settings of one register to another
register.
&
“Copying the Contents of a Register
(Copy REG)” (p. 88)
AccMacro
This parameter allows you to change
the settings of the Right Hand register
(Treble) in the current SET.
&
“Simultaneously Editing the
Right Hand Accordion Sounds
(AccMacro)” (p. 89)
BasMacro
This parameter allows you to change the
settings of the Left Hand Bass & Chord
register (Accordion) in the current SET.
&
“Simultaneously Editing the
Left Hand Accordion Sounds
(BasMacro)” (p. 90)
FBsMacro
This parameter allows you to change
the settings of the Left Hand FreeBass
register in the current SET.
&
“Simultaneously Editing the Free
Bass Sounds (FBsMacro)” (p. 92)
Restore
This function allows you to undo all or
some changes you made after last saving
your settings by reloading the last version
you saved.
&
“Returning Parameter Values to the
Saved State (Restore)” (p. 93)
Export
This function allows you to save the SET
or User Program data to the connected
USB flash drive.
&
“Saving a Set or User Program to a
USB Flash Drive (Export)” (p. 94)
Import
This function allows you to import the
settings of a SET and User Program file
from the connected USB flash drive.
&
“Importing a Set or User Program
from a USB Flash Drive (Import)”
(p. 94)
Display Function
Exp. Snd
The FR-4x allows you to add new sounds
to the internal sound memory area.
&
“Adding Expansion Sounds
(Exp. Snd)” (p. 94)
FctrySET
You can reset the FR-4x SETs to its factory
settings.
&
“Restoring the Factory Settings
(FctrySET/FctryUPG/FctryALL)”
(p. 95)
FctryUPG
You can reset the FR-4x User Program
memories to its factory settings.
&
“Restoring the Factory Settings
(FctrySET/FctryUPG/FctryALL)”
(p. 95)
FctryALL
You can reset the FR-4x to its factory
settings.
&
“Restoring the Factory Settings
(FctrySET/FctryUPG/FctryALL)”
(p. 95)
Battery
Indicates the remaining battery amount.
ADAP, oooo, ooo, oo, o, LOW!!
Version
Indicates the version number.
Build
Indicates the build number.
Copying a Set to Another Set (Copy SET)
This parameter allows you to copy the settings of one Set to
another Set memory
You can copy the common settings of a set together with the
sounds and settings of each part included in that set.
NOTE
All settings of the target memory are overwritten.
It might therefore be a good idea to archive the target Set
using “Export” (p. 94) before proceeding.
1. Press the [MENU] button.
2. Use the [
K
] [
J
] buttons to select “Utility,” and then
press the [ENTER/YES] button (p. 44).
3. Use the [
K
] [
J
] buttons to select “Copy SET,” and
then press the [ENTER/YES] button.
4. Use the [
K
] [
J
] buttons to select “From,” and select
the set number that you want to copy.