95
Menu Options
d. Press the [ENTER/YES] button to load the Expansion
A message is shown for about two minutes while the data is
being rewritten; when the process is finished, the screen indicates
“Complete.”
&
If you decide to cancel, press the [EXIT/NO] button.
How to erase an expansion memory “MEMORY AREA”
This procedure allows to delete an internal “MEMORY AREA.”
a. Press the [
J
] button.
A confirmation message appears.
b. Press the [ENTER/YES] button to erase the selected
memory area.
After a “Deleting” message the display will show “complete.”
&
If you decide to cancel, press the [EXIT/NO] button.
Restoring the Factory Settings (FctrySET/FctryUPG/FctryALL)
The settings that are saved in the FR-4x can be returned to their
factory-set state. This is called “factory reset.”
NOTE
5 B&C Mode (p. 73), FBs Mode (p. 73), and TrblMode (p. 74)
(button type only) are not initialized by a factory reset.
5 Expansion sounds that were loaded by the Exp. Snd function
are not initialized even if you execute a factory reset.
5 Some of the sets and user programs that are initialized by
factory reset use “Balkan” and “Dallapé” from the expansion
sound data.
In order to play these sets and user programs, you must use
the Exp. Snd function to load the “Balkan” and “Dallapé”
expansion sound data respectively.
&
“Adding Expansion Sounds (Exp. Snd)” (p. 94)
1. Press the [MENU] button.
2. Use the [
K
] [
J
] buttons to select “Utility,” and then
press the [ENTER/YES] button (p. 44).
3. Use the [
K
][
J
] buttons to select the settings that
you want to reset.
Parameter Explanation
FctrySET
You can reset all of the FR-4x SETs to its factory
settings.
FctryUPG
You can reset all of the FR-4x User Program
memories to its factory settings
FctryALL
You can reset the entire FR-4x to its factory
settings .
4. Press the [ENTER/YES] button.
A confirmation message appears.
5. To reset the SETs press the [ENTER/YES] button.
A message is shown during the factory reset; when it is completed,
the screen indicates “Complete” and then indicates “Please OFF.”
&
&
If you decide to cancel, press the [EXIT/NO] button.
6. Turn the power off, then on again.
To Next Page
Loading...
