B. COPY THE MUSICAL DATA INTO THE CARD BY MEANS OF A PC
x Insert the card into a PC with the relative adaptor.
x Open the file previously created in the PC called for instance “G-70”, containing the
data drawn from the CD ROM USB DRIVER
x Copy, selecting and drawing all the files from the PC to the card.
ATTENTION!!! Before withdrawing the card, disconnect the drive of the card from
the PC by means of the appropriate function. NOT MAKING THE DISCONNECTION
MAY CAUSE THE COPY OF THE FILES TO BE INCOMPLETE.
C. UPDATING OF THE BUILT-IN DATA
x Insert the card with its adaptor into the PCMCIA slot of the G-70.
x Switch on the instrument by keeping pressed the switches “SONG” “STYLE”,”USER
PRG” in the section FINDER.
x Wait for the instrument to show the video “Update All ” .
After a few seconds the display will show:
x Press the switch “USER PROGRAM 1”.
With this operation the instrument will effect the following operations:
- the formatting of the built-in memory.
The display shows:
- the copy of all the files container from the CARD to the built-in memory.
The display shows:
- the Factory Reset loading the User Program set and MIDI set.
The operation will end when the G-70 shows the following messages:
“Copy Successful” “Factory Reset Done”.
- UPDATE ALL -
Press user PROGRAM (1) Format & Card ´ Internal
- FORMAT -
Formatting…
**** COPY FROM CARD ****
Copying from directory :
B: \ XXXXXXXX
To Next Page
Loading...
