Roland GAIA 2 - Parameter list

46
Navi
Parameter list
MOTION
Parameter Value Explanation
MOTION SETTINGMOTION SETTING
Motion
OFF, ON Turn this “ON” to play back the motion.
Speed
-10.0, -9.5, – -0.02, 0,
+0.02, –+9.5, +10.0
Selects the playback speed of the motion (tempo, or value relative to one
measure).
X
– (*1) Assigned parameter for X displacement
Y
– (*1) Assigned parameter for Y displacement
X Depth
-63–+63 Parameter sensitivity relative to X displacement (same as LFO Depth)
Y Depth
-63–+63 Parameter sensitivity relative to Y displacement (same as LFO Depth)
Loop
OFF, ON Loop playback on/o
Key Trig
OFF, ON When set to “ON”, the motion starts playing back when you play a key.
Sync
OFF, ON
Tempo Sync on/o.
When set to “ON”, the playback length of one loop at Speed +1.0 is equal to a
whole note.
Snap Back
Sets whether to return the pad to center position when you take your hand o the pad.
OFF Retains the position even after you take your hand o the pad.
SLUG Returns to center position extremely slowly after you take your hand o the pad.
SLOW Returns to center position slowly after you take your hand o the pad.
MID Returns to center position at regular speed after you take your hand o the pad.
FAST Returns to center position quickly after you take your hand o the pad.
IMMD Returns to center position immediately after you take your hand o the pad.
*1 Refer to this list for the assignable parameters. Ø “Panel parameter assignment list”
Cell color Explanation
Blue
Parameters that can be directly operated from the panel.
Green
Parameters that can be directly operated from the panel (while the SHIFT button is pressed).
Orange
Standard parameters that can be edited from the SOUND screen.