Roland GAIA 2 - Page 62

62
Navi
MFX List
07 Resonator
This effect uses “Karplus-Strong synthesis”, which is often used in physical modeling of sounds. This lets you alter the sound with a
maximum of six “resonators” that match dierent keys or chords.
L inL in L outL out
Feedback
Feedback
R outR outR inR in
Delay1Delay1
Delay6Delay6
Low CutLow Cut
Pan
Pan
Balance/W
Balance/W
Balance/D
Balance/D
Parameter Value Explanation
Root
C-1–G9 Fundamental tone (root)
Bright
0–100 Brilliance
Feedback
0–99 [%] Amount of resonator sound fed back to the input
Chord
Composite notes (chord) to resonate
Root, Oct, UpDn, P5, m3, m5, m7, m7oct, m0, m11, M3, M5, M7, M7oct, M9, M11
Panning
0–100 Panning for the resonator
Env Mod Depth
0–100
Adjusts the amount of feedback according to the input level.
Larger values increase the amount of feedback according to the input
level.
Balance
D100:0W–D0:100W
Volume balance between the sound that is sent through the resonator (W)
and the sound that is not sent through the resonator (D).
Low Cut
Frequency
The base frequency used to cut the low-band audio of the resonator input sound (FLAT: no cut).
FLAT, 20, 25, 31, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400, 500, 630, 800 [Hz]
Level
0–127 Output Level