81
Navi
MFX List
Comp / Limiter
36 Compressor
Flattens out high levels and boosts low levels, smoothing out uctuations in volume.
L inL in L outL out
R outR outR inR in
CompressorCompressor
2-Band 2-Band
EQEQ
CompressorCompressor
2-Band 2-Band
EQEQ
Parameter Value Explanation
Attack 0–124 Sets the speed at which compression starts
Release
0–124
Adjusts the time after the signal volume falls below the Threshold Level
until compression is no longer applied.
Threshold
-60–0 [dB] Adjusts the volume at which compression begins
Knee
0–30 [dB]
This smooths out the sonic transition, from when the compression is not
engaged until when the compression begins.
This gradually applies compression from just before the Threshold point.
Higher values produce a smoother transition.
Ratio
1:1, 1.5:1, 2:1, 4:1, 16:1,
INF:1
Compression ratio
Post Gain
0–+18 [dB] Level of the output sound
Level
0–127 Output Level
37 Limiter
Compresses signals that exceed a specied volume level, preventing distortion from occurring.
L inL in L outL out
R outR outR inR in
LimiterLimiter
2-Band 2-Band
EQEQ
LimiterLimiter
2-Band 2-Band
EQEQ
Parameter Value Explanation
Release
0–127
Adjusts the time after the signal volume falls below the Threshold Level
until compression is no longer applied.
Threshold
0–127 Adjusts the volume at which compression begins
Ratio
1.5:1, 2:1, 4:1, 100:1 Compression ratio
Post Gain
0–+18 [dB] Level of the output sound
Low Gain
-15–+15 [dB] Amount of boost/cut for the low-frequency range
High Gain
-15–+15 [dB] Amount of boost/cut for the high-frequency range
Level
0–127 Output Level