Roland GAIA 2 - Page 85

85
Navi
MFX List
42 2Tap PanDly (2 Tap Pan Delay)
The delay sound is heard both at the left and at the right.
R outR out
L outL out
Balance W
Balance W
Balance D
Balance D
L inL in
Double Double
Tap DelayTap Delay
R inR in
Delay 1
Feedback
Delay 2
Parameter Value Explanation
Delay Sync
OFF, ON If this is ON, the delay synchronizes with the tempo.
Time (ms)
1–2600 Adjusts the time until the second delay sound is heard.
D.Time (Nt)
Note
1/64T, 1/64, 1/32T, 1/32, 1/16T, 1/32., 1/16, 1/8T, 1/16., 1/8, 1/4T, 1/8., 1/4,
1/2T, 1/4., 1/2, 1T, 1/2., 1, 2T, 1., 2
Delay Fbk
-98–+98 [%]
Adjusts the proportion of the delay sound that is fed back into the eect
(Negative values invert the phase).
Dly HF
Adjusts the frequency above which sound fed back to the eect is ltered out. If you don’t want to
lter out any high frequencies, set this parameter to BYPASS.
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000, BYPASS
[Hz]
Dly1 Pan
L64–63R Adjusts the stereo location of delay 1.
Dly2 Pan
L64–63R Adjusts the stereo location of delay 2.
Dly1 Lv
0–127 Adjusts the volume of delay 1.
Dly2 Lv
0–127 Adjusts the volume of delay 2.
Low Gain
-15–+15 [dB] Amount of boost/cut for the low-frequency range
High Gain
-15–+15 [dB] Amount of boost/cut for the high-frequency range
Balance
D100:0W–D0:100W
Adjusts the volume balance between the sound that is sent through the
delay (W) and the sound that is not sent through the delay (D).
Level
0–127 Output Level
43 3Tap PanDly (3 Tap Pan Delay)
Produces three delay sounds; center, left and right.
R outR out
L outL out
2-Band 2-Band
EQEQ
2-Band 2-Band
EQEQ
Balance W
Center Tap
Balance W
Feedback
Balance D
Balance D
L inL in
Triple Tap Triple Tap
DelayDelay
R inR in
Left Tap
Right Tap
Parameter Value Explanation
Dly L Sync
OFF, ON If this is ON, the rate synchronizes with the tempo of the rhythm.
DL.Time
1–2600 Adjusts the time until the left delay sound is heard.