93
Navi
MFX List
52 2V PShifter (2 Voice Pitch Shifter)
Shifts the pitch of the original sound. This 2-voice pitch shifter has two pitch shifters, and can add two pitch shifted sounds to the
original sound.
Pan 1 R
R outR out
L outL out
Balance W
Balance W
Balance D
L inL in
2-Voice 2-Voice
Pitch Pitch
ShifterShifter
2-Band 2-Band
EQEQ
2-Band 2-Band
EQEQ
Balance D
Level 1
Pan 1 L
Pan 2 L
Pan 2 R
Level 2
R inR in
Parameter Value Explanation
P1Coarse
-24–+12 [sem] Adjusts the pitch of Pitch Shift 1 in semitone steps.
P1 Fine
-100–+100 Adjusts the pitch of Pitch Shift Pitch 1 in 2-cent steps.
P1 Dly Sync
OFF, ON If this is ON, the rate synchronizes with the tempo of the rhythm.
P1D.Time
1–1300
Adjusts the delay time from the direct sound until the Pitch Shift 1 sound
is heard.
P1DRate Nt
Note
1/64T, 1/64, 1/32T, 1/32, 1/16T, 1/32., 1/16, 1/8T, 1/16., 1/8, 1/4T, 1/8., 1/4,
1/2T, 1/4., 1/2, 1T, 1/2., 1, 2T, 1., 2
P1 Feedback
-98–+98 [%]
Adjusts the proportion of the pitch shifted sound that is fed back into the
eect (Negative values invert the phase).
P1 Pan
L64–63R Stereo location of the Pitch Shift 1 sound
P1 Level
0–127 Volume of the Pitch Shift 1 sound
P2Coarse
-24–+12 [sem]
Settings of the Pitch Shift 2 sound.
The parameters are the same as for the Pitch Shift 1 sound.
P2 Fine
-100–+100
P2 Dly Sync
OFF, ON
P2D.Time
1–1300
P2DRate Nt
Note
P2 Feedback
-98–+98 [%]
P2 Pan
L64–63R
P2 Level
0–127
Low Gain
-15–+15 [dB] Amount of boost/cut for the low-frequency range
High Gain
-15–+15 [dB] Amount of boost/cut for the high-frequency range
Balance
D100:0W–D0:100W
Volume balance between the direct sound (D) and the pitch shifted sound
(W)
Level
0–127 Output Level