Roland GAIA 2 - Reverb;Delay common parameters

96
Navi
Reverb/Delay parameters assignment list
Type
REV/DELAY CTRL1 REV/DELAY CTRL2 REV/DELAY LEVEL
REV/DELAY LEVEL
+ [SHIFT]
Parameter
LFO Asgn
Parameter
LFO Asgn Parameter *4 LFO Asgn Parameter *4 LFO Asgn
Shimmer Reverb
Time —
Pitch1, 2
Feedback *1
µ
Wet Level
µ
Send
Amount
µ
*5
Modulation Reverb
Time
µ
Modulation
Depth
µ
Eect Level
µ
Send
Amount
µ
*5
INTEGRA-7 Reverb
Time
µ
LF Damp, HF
Damp *2
µ
Wet Level
µ
Send
Amount
µ
*5
SRV-2000 Reverb
Time — HF Damp Wet Level
µ
Send
Amount
µ
*5
Delay
Delay Time — Feedback
µ
Wet Level
µ
Send
Amount
µ
*5
2Tap PanDly
Delay Time
*3
µ
Feedback
µ
Wet Level
µ
Send
Amount
µ
*5
Tape Echo
Repeat Rate
µ
Intensity
µ
Echo Level
µ
Send
Amount
µ
*5
*1 Both Pitch 1 and 2 Feedback change at the same time.
*2 When you turn the [CTRL 2] knob clockwise, the LF Damp value increases and the HF Damp value decreases.
*3 When Rate Sync Switch is ON, the Rate changes depending on the note you play. LFO assign is disabled.
When Rate Sync Switch is OFF, the Rate changes in Hz or in msec.
*4 SOUND/CTRL/REV/DLY knob: The parameter assignment is reversed when this is set to REVERSE.
*5 SOUND/CTRL/REV/DLY knob: The LFO assignment is enabled when this is set to REVERSE.
Reverb/Delay common parameters
Parameter Value Explanation
Switch
OFF, ON Switches reverb/delay on/o.
Type
00–07 Selects the types of reverb/delay.
Send Amount
0–127 Adjusts the level of original sound sent to the reverb.
Level
0–127 Adjusts the overall output volume.
00 Thru
01 Shimmer Reverb
A reverb that includes two pitch-shifted sounds and the original audio input. This is a reverb with a brilliant-sounding high end.