Roland GR-1 - Page 21

4, Adjusting the Pickup Sensitivity for Individual String
€——
——
meses
ttt
sa
Á
e Play a note on any string to select that string for adjustment.
. You can
When you play a suing. the display will change automatically to show that string mum
now adjust the sens y of that string n: “evel meter" display that looks something like this:
| | SE ON
i jeer
Lii- anni
+
Level meter
© Adjust the input sensitivity using the VALUE | INC jand] DEC |buttons.
e from Oto 7. Just like on a tape recorder's level meter, set the
The sensitivity is adjustable in a ras:
input sensitivity so that when playing hard the level meter only occasionally goes all the way over to
the sk mark on the right-hand side.
if you are almost constantly "pegging" the meter, press VALUE to back off. If you are
never getting up to the * mark, press VALUE to boost the level a bit.
& When you have adjusted the sensitivity of all the strings, press| EXIT/NO twice.
You will he returned to the Play mode.
* The above procedure will have to be repeated whenever you reinstall the GK - 2 pickup on
your guitar or change the height of the divided pickup. Otherwise, once you have
completed the adjustment, these setting values are stored in memory, so that even if you
turn the power off you won't have to readjust the sensitivity every time.