Roland GRAND - Pedal Settings (4. Pedal)

62
Detailed Settings for Various Functions (Utility Screen)
Here you can make settings for the center and left pedals.
fig.UtilPedal.eps
You cannot change the settings for the right pedal. This pedal
will always operate as damper pedal.
Pedal Settings (4. Pedal)
Parameter
Value Description
Piano Pedal
Mode
SETUP, SYSTEM
Pedal settings can be saved within
each setup (p. 48). When you
switch setups, this setting specifies
whether the pedal settings will
change to the settings saved in
that setup (SETUP) or will not
change (SYSTEM).
Center Pedal
Assign
Refer to
“Functions That
Can Be Assigned
to a Pedal” (p.
39).
Specifies the function that will be
controlled by the center pedal.
Center Pedal
Min
(Range of values
for the assigned
function)
Specifies the value sent when the
center pedal is released.
Center Pedal
Max
Specifies the value sent when the
center pedal is fully depressed.
Left Pedal
Assign
Refer to
“Functions That
Can Be Assigned
to a Pedal” (p.
39).
Specifies the function that will be
controlled by the left pedal.
Left Pedal Min
(Range of values
for the assigned
function)
Specifies the value sent when the
left pedal is released.
Left Pedal Max
Specifies the value sent when the
left pedal is fully depressed.
V-Piano-Grand_e.book 62 ページ ２０１１年２月１０日 木曜日 午後１２時４分