63
Detailed Settings for Various Functions (Utility Screen)
fig.UtilMIDI.eps
The V-Piano Rx Channel setting is stored in system memory. It
cannot be individually stored in each setup.
fig.UtilAmb.eps
When Ambience Mode is set to “System,” the Ambience Level
will conform to the position of the Ambience knob.
MIDI Settings (5. MIDI)
Parameter
Value Description
MIDI Tx
Channel
1–16
Specifies the MIDI channel on which
the V-Piano Grand’s performance data
is transmitted via MIDI. If you want to
use the V-Piano Grand’s performance
data to play an external MIDI device,
set the V-Piano Grand’s transmit
channel to match the receive channel
of the external MIDI device.
V-Piano Rx
Channel
OFF, 1–16
If you want to use MIDI data from an
external MIDI device to play the V-
Piano Grand’s sounds, set the
V-Piano Grand’s receive channel to
match the transmit channel of the
external MIDI device.
Tx Bank Select
(MSB)
OFF, 0–127
Specifies the Bank Select MSB that is
transmitted when a setup is recalled.
Tx Bank Select
(LSB)
OFF, 0–127
Specifies the Bank Select LSB that is
transmitted when a setup is recalled.
Tx Program
Change
OFF, 1–128
Specifies the Program Change that is
transmitted when a setup is recalled.
Ambience Settings (6. Ambience)
Parameter
Value Description
Ambience
Mode
SETUP, SYSTEM
When you switch setups, this setting
specifies whether the ambience
settings will change to the settings
saved in that setup (SETUP) or will not
change (SYSTEM).
Ambience
Type
ROOM 1,
ROOM 2,
ROOM 3,
STUDIO 1,
STUDIO 2,
STUDIO 3,
CLUB 1,
CLUB 2,
CLUB 3,
HALL 1,
HALL 2,
HALL 3,
S.HALL 1,
S.HALL 2,
S.HALL 3
Selects the type of ambience.
Ambience
Level
0–127
Adjusts the ambience effect.
This parameter is linked with the
[Ambience] knob.
V-Piano-Grand_e.book 63 ページ ２０１１年２月１０日 木曜日 午後１２時４分
To Next Page
Loading...
