64
Chapter 3 Recording Your Performance (Sequencer)
Editing a Pattern
You can edit either copy/delete the patterns or erase the part.
Basic Settings for Editing
1. Press [WRITE] in Sequencer mode.
fig.3-14.e
2. Press [ PARAMETER] or [PARAMETER ] to
select the editing function or parameter.
3. Turn [PATCH/VALUE] to set the value.
4. Press [WRITE] to execute.
* If you decide not to execute, press [EXIT].
Copying a Pattern
You can copy selected part of currently selected pattern.
fig.3-15
Dst: U01–U99
Select the copy-destination user pattern.
ALL, Perc1, Perc2, Melo1, Melo2
Select the part that you wish to copy.
ALL: All parts are copied.
Perc1: Percussion Part 1 is copied.
Perc2: Percussion Part 2 is copied.
Melo1: Melody Part 1 is copied.
Melo2: Melody Part 2 is copied.
Erasing Parts
You can erase performance data from specified measures of a
part or pattern. The erased position will become blank
measures.
fig.3-16
Meas: ALL, 001–999-001–999
ALL: This erases the data from all measures.
001–999-001–999: This erases the data from specified area.
ALL, Pc1, Pc2, Ml1, Ml2
Select the part to be erased.
ALL: All parts are erased.
Pc1: Percussion Part 1 is erased.
Pc2: Percussion Part 2 is erased.
Ml1: Melody Part 1 is erased.
Ml2: Melody Part 2 is erased.
Connecting Two Patterns
You can connect the currently selected pattern to the end of
the selected pattern.
fig.3-17
Dst Pattern: U01–U99
Select the append-destination pattern.
Deleting a Pattern
You can delete specified measures from a pattern. Later
measures are moved forward.
fig.3-18
Meas: ALL, 001–999-001–999
ALL: This deletes all measures.
001–999-001–999: This deletes the specified measures.
It is not possible to select a preset pattern as the copy /
append-destination, or execute the erase /delete at a preset
pattern.
P01 PTN COPY
Dst:U01 ALL
Pattern Number
Function
U: User
P: Preset
Parameters
U01 PTN WRITE
[WRITE/EXIT]
when [WRITE] is pressed at the preset pattern
when [WRITE] is pressed at the user pattern
U01 PTN COPY
Dst:U01 Perc1
U01 PTN ERASE
Meas:001-999 Pc1
U01 PTN APPEND
Dst Pattern U01
U01 PTN DELETE
Measure ALL
To Next Page
Loading...
