Roland HP 1300e - Roland Piano Basic Operations; Powering the Piano On and Off; Connecting and Using Headphones

5 B ES
KEY TOUCH REC
LIGHT HEAVY
CHORUS REVERB
PLAY
ET El dei PE | E
tton
Pres: ‘5 button lits indicator will light) to add
minute puisations to the sounds you play, and make them
Depth leveis. (p. 10)
* Chorus On/Off setting can be set individually for each
Voice.
Hold down a Voice button while you press the CHO-
RUS button to store the setting (ON /OFF) along with
that Voice.
REVERB Button
Press the REVERB button (its indicator will tight} to add
reverberation (spacious ambiance) to the sound.
You can select from six Reverb Depth levels. {p. 10)
* Reverb On/Off cannot be set individually for each
Voice. :
Turning the Power On
1, Insert the plug on the power cord into an outlet.
2. Press the POWER button on the left side of the panel.
(Press the button again to turn it OFF.)
Pressing the button once Pressing the button again
BE M
ON OFF
* A muting feature comes into effect for a brief interval
(about 2 seconds) after power up. During this interval,
nothing will be heard if you play the keyboard.
* Be sure to use only the power cord supplied with this
unit.
* Whenever you do not intend to use the piano for an
extended period of time, disconnect the power cord
from the outlet.
DEMO
KEYTOUCH Button
Allows you to adi oard’s
i4 REC Button
Allows you to record your performances. (p. 8)
PLAY Button
Psessed to play back what you have recorded. (p. 8)
Using Headphones
To use headphones, insert the plug into the jack located
on the left side of the instrument.
* The piano’s speakers will no longer produce sound
once you have headphones connected. This is conven-
ient for private practice or late-night playing.
* The VOLUME knob on the instrument can be used to
adjust the volume as necessary.
* We recommend the use of stereo headphones.