Roland HP 1700 - 2 Getting Started; Turn the power on; Adjust the volume; Adjust the brightness

2 Getting Started
This section will explain basic operation. If you are using a digital piano for the first time, be sure to read this section first.
Turn the power on
Press the power switch (POWER).
In a few seconds, the unit will be ready to produce sound.
A muting circuit will operate for approximately 2 seconds after the power is turned on,
so there will be no sound during this time.
Play the keyboard and you will hear the grand piano sound (PIANO1). Notice that your
playing dynamics cause natural changes in timbre and volume.
Adjust the volume
Use the volume control (VOLUME) to adjust the volume to a desired level.
At “MAX” the volume will be at maximum, and at “MIN” the volume will be at minimum.
VOLUME
MIN MAX
Adjust the brightness
Use the brilliance control (BRILLIANCE) to adjust the desired tone quality.
At “BRIGHT” the tone will be brighter, and at “MELLOW?” the tone will be more mellow.
BRILLIANCE
MELLOW , BRIGHT