Roland HP 2700 - Applying Reverberation to the Sound; Using the Chorus Effect to Add Breadth; Adding Tremolo to the Sound

Applying Reverberation to the Sound
Reverberation, creates a sense of spaciousness,
and conveys the realistic presence an instrument
would have in one of 3 different environments.
ROOM Provides the ambience that would
exist when playing in a room that is
“live,” that is, reverberates well.
Provides the feeling of presence that
would be obtained if playing on
stage in a small hall.
Provides the reverberation of a
concert hall.
The Reverb effect is made active by pressing one
of the REVERB buttons (ROOM/STAGE/HALL).
The indicator for the button will light.
HARPS! = VIBRA- —E.. PIANO CHORUS TREMOLO
CHORD = =PHONE ROOM
eet al 0 ea
Using the Chorus Effect to
Add Breadth _ The CHORUS Button
The Chorus effect is made active by pressing
the CHORUS button. The indicator for the
button will light.
Further, if you press a VALUE button while the CHORUS
button is held down, you can select the particular Depth
for the Chorus effect that you wish, from among the 8
levels provided.
4 Deepens the Chorus effect.
(Standard — level +3)
¥ Provides a more shailow Chorus effect.
(Standard — level —4)
* To set Chorus at the standard depth, simultaneously press both
Aand ¥.
The Chorus effect is turned off by pressing the CHORUS
button again. Its indicator will go out.
* Once a Chorus setting has been for a voice, it will only apply to
that voice which has been selected.
Ya
Chit. J ae ESE,
1. Getting Started
The REVERB Button
To select the Depth of the reverberation, hold down one
of the REVERB buttons while you use the VALUE buttons
to choose from the 8 levels that are available.
A Deepens the Reverb effect. (Standard — level +3)
Vv Provides a more shallow Reverb effect.
(Standard — level —4)
* To set Reverb at the standard Depth, simultaneously press both
A and VY.
The Reverb effect is turned off by pressing one of the
REVERB buttons again. Its indicator will go out.
* Once a Reverb setting is made, it will apply to any voice which
is selected.
VALUE nnn DEMO
REVERB_—___
STAGE HALL
Adding Tremolo to the Sound
Le The Tremolo Button
The Tremolo effect is produced by shifting the
sound from left to right.
Press the TREMOLO button and its indicator will
light.
Further, if you press the VALUE button while the TREMOLO
button is held down, you can select the desired Speed for
the Tremolo effect from among the 8 levels provided.
A Increases the speed of the Tremolo effect.
(Standard — Level +3)
¥ Decreases the speed of the Tremolo effect.
(Standard — Level —4)
* To set Tremolo at the standard rate, simultaneously press both
A and V.
The Tremolo effect is turned off by pressing the TREMOLO
button again. Its indicator will go out.
* Once a Tremoro setting has been for a voice, it will only apply
to that voice which has been selected.