Roland HP302 - Customizing Split Keyboard Tones; Changing Right-Hand Tone Selection; Changing Left-Hand Tone Selection

35
Performing
Changing the Tones of the Left and Right Zones
Changing the right-hand tone
fig.Panel
1. Press a tone button.
The number of the currently selected for the right-hand zone are shown.
2.
Press the [-] or [+] button.
A different tone is selected.
Changing the left-hand tone
fig.Panel
1.
Hold down the [Twin Piano] button and press a tone button.
The number of the tone currently selected for the left-hand zone are shown.
2.
While holding down the [Twin Piano] button, press the [-] or [+] button.
A different tone is selected.
You can change the pitch of the left-hand sounds in steps of an octave (p. 57).
2
1
1
2
HP305_302_e.book 35 ページ ２０１０年１月５日 火曜日 午後１２時２分