Roland HP302 - Connecting External Speakers; Speaker Connection and Sound Output; Powering Down Audio Equipment Safely

68
Connecting to Other Devices
fig.aaaa
1.
Turn the volume all the way down on the HP305/HP302
and on the device you’re about to connect.
2.
Turn off the power to the HP305/HP302 and speakers.
3.
Use audio cables (sold separately) to make the
connection.
4.
Switch on the HP305/HP302.
5.
Switch on the connected speakers.
6.
Adjust the volume level on the HP305/HP302 and the
connected speakers.
When you play the HP305/HP302’s keyboard, the sound is played
from the connected speakers.
Turning Off the Power
1.
Turn the volume all the way down on the HP305/HP302
and on the speakers you’re about to connect.
2.
Turn off the connected speakers.
3.
Turn off the HP305/HP302.
Connecting Speakers to the HP305/HP302 and Outputting Sounds
Amplified Speakers,
Audio System, etc.
Input (Line In)
Output Jacks
Output Jacks
Input (Line In)
HP305 HP302
1/4” plug
1/4” plug
HP305_302_e.book 68 ページ ２０１０年１月５日 火曜日 午後１２時２分