The Juno-106
includes
enough
memory
capacity to retain up
to 128
different
patch
programs which you
can change from
one to
another during live
performance just by
flick
of a button.
Also, you can
edit any patch
program in
use
by
moving the
controls. It aiso features bat-
tery
back-up
circuit to retain the programs
even
when switched
off.
®
Bank Group
Selector Button &
indicator
(2)
Bank Number
Buttons
(3)
Bank Patch
Number
Display
(4)
Patch
Number Buttons
(5)
Manual
Button
(6)
Write
Button
The Juno-106
features
battery back-up
system
to retain the
programs
even when
switched
off. The battery
should be
replaced
with
a
new
set
in every
five years. In
this case, please
have your
local
Roland dealer
replace
the
battery.
{The
first
replacement might be
required be-
fore five
years.)
<Tape lnterface>
(7)
Save Button &
indicator
(§)
Verify Button &
Indicator
(?)
Load
Button & Indicator
You
can select any patch
in the
Memory
by
using the
Bank Number Button
©
and Patch
Number Button
©.
Firstly, select one of the
Bank Groups A
or B
by
pressing the Bank Group
Selector
Button.
This Button
alternately selects A
and B each
time you
press it Turning the
Juno-106 on
will
automatically select Bank
A (the
corres-
ponding indicator lights up}. Then
press any
Bank
Number and Patch
Number Buttons you
like. The Display
Window
(3)
will show
the
Bank and
Patch numbers currently
selected.
*
In Juno-106,
you
can select
any combina-
tion
of either
of Bank Group
A or B,
one of
the
Bank Numbers
1
to
8 and one
of the
Patch
Numbers 1 to
8. You
do not
need to press
the Bank
Number Button to seiect a
patch in
the
same Bank as the one
currently in use.
Aiso, if you are to
select
a
patch
of the same
Patch Number in a
different Bank, you
only
need to press the
relevant Bank
Selector
Button.
*
It is possible to
change the
Patch
Number
by
pressing the
Pedai Switch.
{Refer
to p.24)
e
23 (Bank Group B,
Bank
2,
Patch 3)
SELECT
GROUP A
(
GROUP
BH
You can
press either of the
Buttons first.
t
!
To Next Page
Loading...
