6
Processing Live Sets with the BOSS Insert FX
If you want to be sure you’re recording the keyboard cleanly—without
any stray audio from the JUNO-Gi’s inputs—make sure the AUDIO INPUT
button isn’t lit. If it is, press it a few times to un-light it.
1 In the digital recorder’s REC SOURCE SELECT area, press the KEYBOARD
button to light it and display the KEYBOARD INPUT window.
When the KEYBOARD button’s lit, you can record a live set being
played on the JUNO-Gi’s keyboard with or without the BOSS Insert
FX. (The live set’s own effects are always recorded in either case.)
2 Make your choice by pressing the number buttons under the display
to light the desired option onscreen. Press
• 1 (KEYBOARD)—to record the JUNO-Gi’s live set without the
BOSS Insert FX. The live set’s own effects will still be recorded.
• 2 (KEYBOARD + INS FX)—to apply the BOSS Insert FX to the
sound of the live set being played on the keyboard.
Using the BOSS Insert FX for Bouncing
You can use the BOSS Insert FX when you bounce tracks in the digital
recorder. We explain how to do this starting on page 13 of the Workshop
booklet The Digital Recorder—Getting Serious. For an explanation of what
bouncing is, see page 12 of the same Workshop booklet.
Using the BOSS Insert FX for Mixing
When you’re mixing your song, you can set the BOSS Insert FX to process
any of your tracks, the rhythm track, or the entire mix by setting the Location
parameter—explained starting on page 4—as desired.
2 Press
• 1 (GUITAR)—to record a guitar or other electric instrument
connected to the JUNO-Gi’s GUITAR/MIC jack.
When you’re recording guitar, make sure the rear-panel PHANTOM
switch is set to GUITAR (Hi-Z).
• 2 (MIC)—to record a mic connected to the JUNO-Gi’s
GUITAR/MIC jack.
If you’re recording with a condenser mic that requires power, make
sure the rear-panel PHANTOM switch is set to ON. If it doesn’t, be sure
to set the switch to OFF to avoid damaging the mic.
• 3 (LINE)—to record audio from a device connected to the
JUNO-Gi’s LINE jacks.
• 4 (USB SONG)—to record a song being played by the JUNO-Gi’s
USB Song Player.
• 6 (USB AUDIO)—to record audio from a computer connected via
USB to the JUNO-Gi.
See the Using the JUNO-Gi with a Computer Workshop booklet to
learn about installing the necessary drivers for exchanging audio with
a computer.
3 Press EXIT to leave the AUDIO INPUT SELECT screen when you’re
done.
Once you’ve selected your input, set your level as described starting at the
bottom of page 19 of the Meet the JUNO-Gi Workshop booklet.
Guitar hum making you crazy? A quick way to toggle off your audio
input is to press the lit AUDIO INPUT button to turn it off.
To Next Page
Loading...
