12
02 About the JUPITER-50’s Sounds
Using a Filter While You Play
1. While playing the keyboard, turn the [CUTOFF/C1] knob.
The low-pass lter will smoothly modify the sound.
2. While playing the keyboard, turn the [RESONANCE/C2]
knob.
The resonance will change, modifying the distinctive
character of the sound.
Playing Arpeggios
1.
Press the ARPEGGIO [UPPER] button.
An arpeggio will begin sounding when you play a chord on
the keyboard.
Playing a Synth Sound
Selecting a Synth Sound Live Set
1.
Press the [MANUAL] button.
2. Access the Live Set list for “SYNTH BRASS.”
3. Turn the value dial to select “0004 Jupiter Brass 4,” and press the [ENTER] button.
page 47
Switching the Rotary Sound
1.
While playing the keyboard, press the ROTARY
SOUND [SLOW/FAST] button.
Each time you press the button, the rotational speed of the
rotary speaker will speed up or slow down.
Using the Harmonic Bars to Change the Sound
1.
While holding down the [SHIFT] button, press the
UPPER [PIANO] button.
The TONE MODIFY screen (p. 60) will appear.
2. Use the cursor buttons and the value dial to edit
the values.
Playing an Organ Sound
Selecting an Organ Sound Live Set
1.
Press the [MANUAL] button.
2. Access the Live Set list for “COMBO ORGAN.”
3. Turn the value dial to select “1628 ToneWheel Org1,” and press the [ENTER] button.
page 53
To Next Page
Loading...
