Roland JV-80 - Page 51

2.
PLAYING
A
PERFORMANCE
What is
the
Performance
Play
mode?
When
you play
the JV-80 in
the
Performance Play mode,
the
performance data
controls the Patches
through the
internal zone, and
external MIDI
data is
controlled through
the transmit zone.
The
internal device
(the controllers of
the JV-80),
such as the
keyboard, controls
the Patches
assigned to each Part
for
the internal sound
source, and also
serves
as a
master
keyboard which
controls play
data over eight MIDI
channels through
the transmit
zone for the
external
device (MIDI). You
can also change
the sound of
Patches
assigned to the Parts
according to
how you play. Do
this
by
setting the
parameters of
the Parts and
internal/transmit
zones,
matching to the song
and
performance condition.
Since data
which
is
called up to the
temporary memory
area
is used
when a Performance
is selected,
the original
Performance in the
internal memory or
DATA card
will
be
retained.
The data being used
in the temporary
area can be
stored as a
new Performance in the
user memory. (See
Command
Section, Write
iVIode.)
1 E 3
4 5 S
7 S
51