Roland JV-880 - The Utility Mode; Write; Copy; Initialize

THE
UTILITY
MODE
Press
!
UTILITY
[
to select the
Utility mode. (The indicator
lights.)
write
This operation
stores
edited data (Patches,
Performances or
Rhythm Sets) to internal
memory
or to
a
Data Card.
copy
This
operation
copies Patch, Performance
and
Rhythm Set
data to the temporary area.
initialize
Data card
This
operation initializes
(returns) Patch,
Performance
and Rhythm
Set data in the
temporary area
to
the factory
preset parameter values.
This operation
allows you
to transfer data between
internal
memory and a Data
Card. This
operation
also initializes
a Data
Card.
Bulk dump
Temporary dump
This operation transfers
data to an external
MIDI device.
This operation
transfers the
data in the temporary
area
to an external MIDI device.
Load patch single
Loading
a Single Patch
This operation
copies the data of
a
single
Patch
stored on
a PCM Card (SO-PCM 1
series) or in
an
expansion board (SR-JV80
series) to the temporary area,
internal
memory or Data Card.
Load patch group
toadtng
a
Group of Patches
This operation copies Patch data
(in
groups)
from' a PCM
Card (SO-PCM 1 series)
or an expansion
board (SR-JV80 series)
to
internal
memory or Data
Card.
Memory protect
Factory preset
ROiVI play
This operation
prevents
data
stored in internal
memory from
inadvertently being
erased
or
edited.
This operation restores the data in internal memory,
temporary area and
system area to the
factory
preset
data.
This operation
allows
you to
listen
to the demo songs
stored in memory.
Refer to P.
1-4
for details
on
operation.
9-1