Roland JV-880 - Page 33

IVIodulationCNo.l)
When
this
message is
received, the
parameter
selected from Modi
—
4
(P.6-18)
of
the Patch is
changed.
*
Use
exclusive
messages in
order to
change
the modulation
effect or
the
way in which
the
modulation
effect
is applied.
Portamento
time (No.5)
Reception
of this
message changes the time
of the portamento
effect (the
time over which
the
pitch
glides
between
successive notes).
Volume
(No.7)
When this
message is
received, the
level
of
the selected sound changes.
Pan
pot
(No.10)
When
this
message is
received, the stereo
position is shifted between left and right.
Expression (Nd.11)
When this
message is
received, the
parameter selected fro the Patch
EXPl
—
4 (P.6-18) changes.
Holdl
(No.64i
When an
ON
(value:
64
—
127)
message is
received,
the sound continues until an OFF
(value:
63)
message is
received.
Portamento
(No.65)
When this
message is
received, the
portamento effect is switched either on or off.
Reverb
(No.91>
When
this
message is
received, the
reverb is
switched
either on or off.
Chorus
(No.93)
When
this
message is
received, the chorus is
switched either
on
or
off.
RPN(No.100,101)
This
message switches
among the bend range,
master
tune and
fine/coarse tune parameters.
The
value
is set
with the
data entry
message.
Data entry
(No.6/38)
When this
message is
received, the parameter value of
the
selected RPN
parameter changes.
*
The same
parameters may
change differently when receiving
MIDI
messages,
depending
on
the
mode
settings and
channel settings. Refer to the MIDI Implementation (P. 10-32)
for
details.