Using the Sequencer
27
You can select the group (A/B) by holding down the [START] button and repeatedly pressing the BANK [1 (5)]–[4 (8)] buttons.
2.
Hold down the [START] button and press the NUMBER [1]–[8] buttons.
This selects the pattern.
You can also turn the [VALUE] knob while holding down the [SHIFT] button to select the bank and pattern.
● When you press the [MENU] button while holding down the [START] button, the [START] button remains in a pressed-
down state. In this case, you can still select banks and patterns even if you take your finger off the [START] button. To
restore the button to normal, press the [MENU] button.
To Next Page
Loading...
