Configuring the Settings of This Unit
44
Restoring the Factory Settings (Factory Reset)
Returns the JX-08 to its factory defaults.
1.
While holding down the PART [B] button, turn on the power.
The [PAGE/TIE] button blinks. To cancel the factory reset, turn off the power.
2.
Press the [PAGE/TIE] button.
Initialization begins. Once the JX-08 is restored to factory default settings, “donE” appears in the display.
3.
Turn the power of the JX-08 off and then on again.
To Next Page
Loading...
