Roland JX-08 - Script 90; M Stagephsr; Superfilter

Effect Parameters
54
You can also press a step button to select the parameter items.
Script 90
You can also press a step button to select the parameter items.
M StagePhsr
Step
buttons
Parameter Value Explanation
[1]
tyPe PhA2
This creates extremely large phase differences for a deep
phaser effect.
[2]
Sľ
Off
,
On
Turns the effects on/off.
[3]
NodE
4
,
8
,
12
,
16
,
20
,
24
(STAGE)
Number of stages in the phaser
[4]
Nanu
0
–
127
Center frequency from which the sound is modulated
[5]
Sync
OFF, ON
When this is ON, the effect synchronizes with the tempo of
the rhythm.
“8.2.1. Tempo Settings(P.28)”
[6]
tiNE
0.05
–
10.00
(Hz)
Frequency of modulation
[7]
notE
“12.1.18. About note
values(P.57)”
[8]
dEPt
0
–
127
Depth of modulation
[9]
rESo
0
–
127
Amount of feedback
[10]
NiX
0
–
127
Volume of phased sound
[11]
PAn
L 64
–
r 63
Stereo position of the output sound
[12]
Lo
-15
–
15 (dB)
Amount of low range boost/cut
[13]
Hi
-15
–
15
(dB)
Amount of high range boost/cut
[14]
LEU
0
–
127
Output level
You can also press a step button to select the parameter items.
SuperFilter