Roland JX-10 - Mixer Parameter Details

Manual Version 3.21
Page. 24 of 73
MIXER
This is where the volume balance of DCO-1 and DCO-2 is controlled.
Parameter
Data
Value
Function
Programmer
Number
Display
41
MIX DCO 1
00
99
This adjusts the level of DCO-1.
DCO-1 Level
42
MIX DCO 2
This adjusts the level of DCO-2.
DCO-2 Level
43
MIX ENV
When ENV controls DCO-2's level, this sets the
amount of the ENV signal.
DCO-2 Envelope Depth
44
MIX DYNA
3
2
1
off
When DCO-2's level is controlled by ENV Depth and
then by Dynamics, this sets the sensitivity of the Key
Touch.
DCO-2 Dynamics Range
45
MIX MODE
-1
-2
-2
-2
This selects the polarity of the Envelope curve.
Normally, is used. In mode, the ADSR
pattern will be inverted.
DCO-2 Envelope Mode