Manual Version 3.21
Page. 28 of 73
Recalling a Tone
“Recalling a Tone” is a function which can be very useful during a Tone edit. Whilst you are editing a Tone, you
may wish to recall the original Tone which is intact, to compare it with the one you have just edited.
PROCEDURE
1. Press the RECALL button. The Display responds with:
Playing the keyboard will instantly recall the original Tone. * Naturally, this Tone cannot be edited.
2. Press the Recall Button again. The edited Tone is retrieved.
Likewise, each time you press the Recall Button, the original and the edited Tones are alternately called. This
enables a direct sound comparison between the two Tones.
To Next Page
Loading...
