JX-10 MIDI IMPLEMENTATION
Manual Version 3.21
Page. 51 of 73
3. SYSTEM EXCLUSIVE MESSAGES
When a Program change message is sent and MIDI Menu options 21 System Exclusive, 22 Sysex APR and 16
Patch Prog change are set to ON the following messages are sent and recognised.
MESSAGE 1 PROGRAM NUMBER PATCH (PGR)
A B C D E F G H I J
F0H 41H 34H mcH 24H 30H 01H pnH 00H F7H
A = Exclusive message start
B = Roland ID
C = Operation code PGR
D = MIDI channel (mcH) 00H to 0FH (1 to 16 decimal)
E = JX10 Format
F = Level 2 Patch
G = Group ID
H = (pnH) Patch number
I = No operation
J = End of Exclusive message
MESSAGE 2 ALL PATCH PARAMETERS (APR)
A B C D E F G H I
F0H 41H 35H mcH 24H 30H 01H valH F7H
A = Exclusive message start
B = Roland ID
C = Operation code APR
D = MIDI channel (mcH) 00H to 0FH (1 to 16 decimal)
E = JX10 Format
F = Level 2 Patch
G = Group ID
H = (valH) Parameter value 00H to F7H (0-127 decimal) sent in sequence (51 bytes total)
I = End of Exclusive message
MESSAGE 3 PROGRAM NUMBER UPPER TONE (PGR)
A B C D E F G H I J
F0H 41H 34H mcH 24H 20H 01H toneH 00H F7H
A = Exclusive message start
B = Roland ID
C = Operation code PGR
D = MIDI channel (mcH) 00H to 0FH (1 to 16 decimal)
E = JX10 Format
F = Level 1 Tone
G = Group number 01H= Upper Tone
H = (toneH) Tone number 00H-63H (decimal 0-99)
I = No operation
J = End of Exclusive message
To Next Page
Loading...
