Roland JX-10 - Individual Patch Parameters (IPR)

JX-10 MIDI IMPLEMENTATION
Manual Version 3.21
Page. 53 of 73
INDIVIDUAL PATCH PARAMETERS (IPR)
When editing Patch parameters and the MIDI menu option 21 System exclusive is ON then following messages are
sent and recognised
A B C D E F G H I J
F0H 41H 36H mcH 24H 30H 01H prmH valH F7H
A = Exclusive message start
B = Roland ID
C = Operation code IPR
D = MIDI channel (mcH) 00H to 0FH (1 to 16 decimal)
E = JX10 Format
F = Level 2 Patch
G = Group number
H = (pmH) Parameter 00H-32H (0-51 decimal)
I = (valH) Value 00H-F7H (0-127 decimal)
J = End of Exclusive message
Parameter (pmH) Value (valH)
00H-11H Patch name (char 1-18) In ASCII format
12H U/L Balance 00H-F7H (0-127 decimal)
13H Dual Detune 00H-F7H (0-127 decimal)
14H Upper split point 00H-F7H (0-127 decimal)
15H Lower split point 00H-F7H (0-127 decimal)
16H Portamento time 00H-F7H (0-127 decimal)
17H Bend Range 00H 20H 40H 60H (2,3,4,7 semitones)
34H Bend Range 00H 01H (12 semitones when 01H set)
18H Key mode aa See table
33H Key mode bb See table
19H Total volume 00H-F7H (0-127 decimal)
1AH Aftertouch vibrato 00H-F7H (0-127 decimal)
1BH Aftertouch brilliance 00H-F7H (0-127 decimal)
1CH Aftertouch volume 00H-F7H (0-127 decimal)
1DH Upper tone number 00H-63H (0-99 decimal)
1EH Upper chromatic shift 00H-18H 0..+24 semitones 68H-7FH -24...-1 semitones
1FH Upper key assign 00H Poly 1 01H Unison 1 02H Mono 1
04H Poly 2 05H Unison 2 06H Mono 2
20H Upper unison detune 00H-F7H (0-127 decimal)
21H Upper hold 00H = OFF 01H = ON
22H Upper LFO mod depth 00H-F7H (0-127 decimal)
23H Upper portamento 00H = OFF 01H = ON
24H Upper bender 00H = OFF 01H = ON
26H Lower tone number 00H-63H (0-99 decimal)
27H Lower chromatic shift 00H-18H 0..+24 semitones 68H-7FH -24...-1 semitones
28H Lower key assign 00H Poly 1 01H Unison 1 02H Mono 1
04H Poly 2 05H Unison 2 06H Mono 2
29H Lower unison detune 00H-F7H (0-127 decimal)
2AH Lower hold 00H = OFF 01H = ON
2BH Lower LFO mod depth 00H-F7H (0-127 decimal)
2CH Lower portamento 00H = OFF 01H = ON
2DH Lower bender 00H = OFF 01H = ON
2FH Chase level 00H-F7H (0-127 decimal)
30H Chase mode 00H = U-L 01H = U-L-L- 02H = U-L-U-
31H Chase time 00H-F7H (0-127 decimal)
32H Chase play 00H = OFF 01H = ON