JX-10 MIDI IMPLEMENTATION
Manual Version 3.21
Page. 56 of 73
4. BULK DUMP
When a Bulk dump is initiated from the Write menu the following messages are sent.
MESSAGE1 BULK DUMP PATCH (BLD)
A B C D E F G H I J K
F0H 41H 37H mcH 24H 30H grpH 00H prgH valH F7H
A = Exclusive message start
B = Roland ID
C = Operation code BLD
D = MIDI channel (mcH) 00H to 0FH (1 to 16 decimal)
E = JX10 Format
F = Level 2 Patch
G = (grpH) Group ID 01H Internal memory 02H Cartridge memory
H = No operation
I = (prgH) Patch number 00H to 3FH (0 to 63 decimal)
J = (valH) Value 00H to 0FH (0 to 15 decimal) Patch data sent as H/L nibble 96 times in sequence
K= End of Exclusive message
Message 1 repeats 64 times to send all data for 64 patch memories.
MESSAGE 2 BULK DUMP TONE (BLD)
A B C D E F G H I J K
F0H 41H 37H mcH 24H 20H grpH 00H toneH valH F7H
A = Exclusive message start
B = Roland ID
C = Operation code BLD
D = MIDI channel (mcH) 00H to 0FH (1 to 16 decimal)
E = JX10 Format
F = Level 1 Tone
G = (grpH) Group ID 01H Internal memory 02H Cartridge memory
H = No operation
I = (toneH) Tone number 00H to 31H (0 to 49 decimal)
J = (valH) Value 00H to 7FH (0-127 decimal) Tone data sent 59 times in sequence
K= End of Exclusive message
Message 2 repeats 50 times to send all data for 50 user tones
COMPATIBILITY MODES.
To improve compatibility with existing software packages and fix some transmission issues V3.0+ can be set via the
MIDI menu option 51 Compatibility as follows:
OFF Full speed sysex transmission
1 Transmission slowed to simulate factory speed
2 Transmission slowed to simulate factory speed ,Cart dump re-mapped as Internal memory and tone sysex
IPR mapped to the currently selected tone (as in V2.3SE)
V3.0+ also corrects a firmware bug which used non standard ASCII characters when naming Patch/Tone memories
from the front panel, this led to garbled program names in popular editing/library software.
Simply transferring the program data to the JX10 (which will attempt to correct the data upon loading) and then
transferring the data back to your editor/librarian should repair most files.
To Next Page
Loading...
