164
Chapter 9 Connecting External Devices
Chapter 9
Connection Examples:
Connection with an Apple Macintosh computer
Use a computer cable (sold separately) to connect the
Computer connector on the KR-7/5 to the modem port (or
printer port) on the Apple Macintosh. Set the Computer
switch to “Mac.”
When using the Macintosh “Patch Bay” utility, specify 1
MHz as the Interface Type (MIDI Interface Clock).
fig.09-
Connection with an IBM PC
Use a computer cable (sold separately) to connect the
Computer connector on the KR-7/5 to the COM1 or COM2
serial port on the IBM PC. Set the Computer switch to “PC-
2.”
fig.09-
Apple Macintosh
Macintosh IIci
Modem Port
Computer cable (sold separately)
Computer
MIDI
PC
-
1
Mac
PC
-
2
RS-232C
IBM PC/AT
Computer cable (sold separately)
Computer
MIDI
PC
-
1
Mac
PC
-
2
KR-7_5_e.book 164 ページ ２００４年７月７日 水曜日 午前１０時３分
To Next Page
Loading...
