Roland LEC-330 - Correcting for Misalignment in Bidirectional Printing

Chapter 5 Feature Reference
5-5 Optimizing Printing to Match Media Thickness
107
Chapter 5 Feature Reference
in Bidirectional Printing," p. 108, "Correcting for Misalignment in Bidirectional Printing More Precisely"
Default Setting
[HEAD HEIGHT]: LOW
Correcting for Misalignment in Bidirectional Printing
Procedure
1. Print a test pattern.

Press .
Press
.

Press .
Press
to start printing.
2. Read the correction values from the test pattern.
3. Enter the correction values that you read.

Press .

Press .
Use
to set the correction values.
Press
to enable the setting.
MENU
ADJUST BI-DIR
ADJUST BI-DIR
TEST PRINT
Simple
ADJUST BI-DIR
SIMPLE SETTING
SIMPLE SETTING
0
- 6
Test pattern
Choose the value that produc-
es the least misalignment.
Correction-value scaleCurrent correction value