Roland M-200i V-mixer - Basic Operation and Data Management; Basic Panel Operations and Channel Layer Selection

26
Basic operation
Basic operation
Use the buttons of the LAYER section to select the channel layer to be controlled by the fader module section. Each channel layer assigns
the following channels to the fader module section:
Pressing a button in the CHANNEL EDIT section or DISPLAY section displays the associated screen. The screens accessed by each button
are as follows:
Pressing [EXIT] at any of the setting screens returns the display to the Home screen. You can select either the CHANNEL EDIT screen or the
METER screen as the Home screen. For details on how to select the Home screen, refer to “Selecting the Home screen” (p. 95).
Basic panel operations
Selecting the channel layer
Channel layer Channels
USER 2 USER LAYER 2 (configurable)
USER 1 USER LAYER 1 (configurable)
AUX/MTX/DCA AUX1–8, MTX1–4, DCA1–4
CH 17-32 CH17–32
CH 1-16 CH1–16
Accessing a screen
Home screen
EQscreen
SENDSscreen
GATE/EXPANDERscreen
SCENEscreen
EFFECTSscreen
DCAGROUPscreen
METERscreen
CHANNELEDITscreen
COMPRESSOR/LIMITERscreen
RECORDERscreen
GEQscreen

MUTEGROUPscreen


SETUPscreen

M-200i_e.book 26 ページ ２０１３年１月１６日 水曜日 午後４時９分