31
Basic operation
Basic operation
1.
Access the desired LIBRARY screen.
2.
Verify that the desired channel, effect, or patchbay is
displayed.
3.
At the library data list, select the desired number, then
press [ENTER].
A popup appears.
4.
Move the cursor to STORE and press [ENTER].
The NAME EDIT screen is displayed.
Storing to numbers displayed with “P” (preset data) or with “L”
(locked data) is not possible.
5.
At the NAME EDIT screen, edit the name (p. 33).
6.
Press [ENTER].
A message prompting you to confirm the operation is
displayed.
7.
Pressing the [ENTER] button stores the data to the library
and closes the popup.
Pressing [EXIT] cancels the library data-store operation.
If the “SCENE/LIB STORE” item in the CONFIRMATION section of
User Preference (p. 94) is not in effect, no confirmation message
will appear in step 6.
Storing data to a library
M-200i_e.book 31 ページ ２０１３年１月１６日 水曜日 午後４時９分
To Next Page
Loading...
