Roland M-400 - SCC: Scene Recall; RSC: Relative Scene Recall

16
Command details
SCC: Scene recall
Function Recalls a scene memory.
Syntax stxSCC:a; (Command syntax: type 2)
a: Scene number (000–299)
<Ex.> stxSCC:010;
Recalls scene number 010.
Note: If you specify a blank scene, the M-400 will return an ERR command (stxERR:5;) and ignore your command.
RSC: Relative scene recall
Function Recalls a scene memory relatively; e.g., “the previous memory” or “two scenes ahead.”
Syntax stxRSC:a; (Command syntax: type 2)
a: Relative scene number (-299–299)
<Ex.> stxRSC:-3;
Recalls the scene memory three memories earlier than the current scene number.
Note: If the scene memory number specified by relative scene is one of the following scenes, the M-400 will return an ERR
command (stxERR:5;) and ignore your command.
• A blank scene.
• A scene number outside the range of 0–299.