16
Added effect types
◆LIMITER : Prevents distortion by compressing high-level signals
◆OUTPUT : Makes global settings for output
LIMITER/OUTPUT
Parameter (name) Setting value Remarks
ON (limiter switch) OFF, ON Limiter on/off
THRE (threshold level) -80.0 – 0.0dB Volume level at which application of the limiter effect starts
ATK (attack time) 0.0 – 800ms
Interval until application of the limiter effect starts after the
input level exceeds the threshold level
REL (release time) 50.0 – 8000ms
Interval until application of the limiter effect ends after the
input level falls below the threshold level
Parameter (name) Setting value Remarks
SOFT CLIP (soft clip) OFF, ON
Suppresses prominent distortion when extreme
compressor/limiter effect is applied
LEVEL (output level) -Inf – 6.0dB Overall volume level after passing through the limiter
To Next Page
Loading...
