Roland M-480 - Page 12

12
Functionality Added in M-480 Ver. 1.6
3. Display the PANEL tab
Press [F5(PANEL)] to display the PANEL tab.
fig.panel-tab.eps
Select operations (refer below) to prohibit on the PANEL tab.
4. Close the popup
Press [F8(OK)] to finalize the setting and close the popup.
Operations you can prohibit
• USER LAYER 3 Remove check to prohibit switching to USER LAYER 3.
• USER LAYER 2 Remove check to prohibit switching to USER LAYER 2.
• USER LAYER 1 Remove check to prohibit switching to USER LAYER 1.
• AUX/MTX LAYER Remove check to prohibit switching to AUX/MTX LAYER.
• CH25-48 LAYER Remove check to prohibit switching to CH25-48 LAYER.
• CH1-24 LAYER Remove check to prohibit switching to CH1-24 LAYER.
• SENDS ON FADER Remove check to prohibit SENDS ON FADER operations.