Roland M-480 - Page 5

5
Functionality Added in M-480 Ver. 1.6
About the Wireless LAN Status Icons
fig.signal-ststus-icons.eps
fig.signal-icon.eps
The M-480 is connected to the wireless LAN access point. This indicates the signal level with 3 bars.
fig.adaptor-connected.eps
Although the wireless USB adaptor is connected, the M-480 is not connected to the wireless LAN access point.
fig.no-adaptor.eps
The wireless USB adaptor is not connected (nothing is displayed).
fig.ad-hoc-mode.eps
The unit is in Ad-Hoc mode (p. 7).
About the Other Displays
• Device Name This displays the device name of this unit that is shown on the application connected via wireless LAN.
• IP Address This displays the current IP address.
• MAC Address This displays the MAC address of the wireless USB adaptor.
The MAC address indicated on the bottom of the wireless USB adapter (WNA1100-RL; sold separately).