Roland M-480 - Mute Groups; About Mute Groups; MUTE GROUP Screen; Assigning a Channel to a Mute Group

114
Mute groups
Mute groups
Mute grouping is a function that lets you control the mute status of multiple channels belonging to a mute group. A channel can belong to
more than one mute group.
The MUTE GROUP screen is used to make mute group settings.
About mute groups
MUTE GROUP screen
1.
In the GROUP section, press [MUTE].
fig.ScrMUTEGroupGuide.eps
The MUTE GROUP screen will appear.
MUTE group 1–8 button
These buttons turn mute groups 1–8 on/off. When you turn
on a mute group, the channels belonging to that group will
be muted.
You can also make the setting for switching MUTE groups on or
off from a USER button (p. 140).
The function buttons have the following operations:
Output muting controlled by [F6 (MUTE ALL OUT)] cannot be
stored in a scene memory. When the M-480 is started up,
muting caused by [F6 (MUTE ALL OUT)] will be turned off.
Accessing the MUTE GROUP screen
1
1
[F1 (MUTE1)]–
[F4 (MUTE4)]
Turns MUTE group 1–4 on/off.
[F6 (MUTE
ALL OUT)]
Mutes all outputs of the M-480 and input/
output units.
[F7 (NAME EDIT)] Accesses the NAME EDIT popup (p. 115).
[F8 (ASSIGN)] Accesses the MUTE GROUP ASSIGN popup.
Assigning a channel to a mute group
The MUTE GROUP ASSIGN popup is used to assign a channel to a
mute group.
You can also use the DCA/MUTE GROUP ASSIGN popup of the
CHANNEL DISPLAY screen to assign a channel to a mute group.
For details, refer to “Assigning a channel to a MUTE group” (p.
55).
1.
Access the MUTE GROUP screen.
fig.ScrMUTEGroup.eps
2.
Move the cursor to the MUTE group button of the desired
mute group, and press [F8 (ASSIGN)].
fig.ScrMUTEGroupAssignGuide.eps
The MUTE GROUP ASSIGN popup will appear.
Target mute group indication
This indicates the mute group to which the settings in the
MUTE GROUP ASSIGN popup will apply.
Channel select buttons
Here you can select the channels that will be assigned to the
mute group.
2
1
1
2
M-480_e.book 114 ページ ２０１１年３月２日 水曜日 午前９時２０分