Roland MC-909 - Adjusting the Balance of each Part; Applying Effects

27
Creating an original song (pattern)
Adjusting the balance of each part
Use the part mixer (the eight sliders in the center of the panel) to adjust the volume
balance and pan of each part.
1. Press [F3 (Mixer)] or [MIXER ASSIGN].
The Mixer screen will appear.
fig.Mixer
2. Press [PART ASSIGN] to select the parts that you want to adjust.
When the [PART ASSIGN] indicator is dark, you can adjust parts 1–8. When the
indicator is lit, you can adjust parts 9–16.
3. Adjust the volume, pan, etc., of each part.
• Press [F1 (Level)] and adjust the volume.
• Press [F2 (Pan)] and adjust the left/right pan position.
• Press [F3 (Key Shift)] and adjust the transposition.
• Press [F4 (Reverb Level)] and adjust the depth of the reverb.
* Alternatively, you can use [CURSOR] to select the part and parameter, or use [VALUE] or
[INC/DEC] to adjust the value.
4. Press [F6 (Close)], [MIXER ASSIGN] or [EXIT] to return to the previous
screen.
Applying effects
As necessary, you can apply effects such as compressor, reverb, or multi-effects.
Refer to p. 88 in the Owner’s Manual.
QS_e 27 ページ ２００５年６月２２日 水曜日 午後３時１５分