©2003 Roland Corporation U.S. MC-909 Getting Started Guide Page 19
®ÂØÒňΠMC-909 Getting Started Guide
4. Press F1 (List) to show a list of available patches. Since Part 10 currently uses a rhythm set, the
MC-909 presents you a list of rhythm set patches.
5. Press to hear how your recording sounds with different rhythm sets.
6. When you’ve finished experimenting, return to PR-A:001 909 TR-909 1, and then exit the screen
by pressing F6 (Select).
7. Press PATTERN to return to the Pattern Play screen.
8. Press STOP to end playback.
Saving a Pattern
Until you actually save your work, the MC-909 holds it in RAM (“Random Access Memory”)—if you
select another pattern or power-down the MC-909, your work is lost. To keep it safe, you’ve got to
save, or “write,” the pattern into the MC-909’s memory. Here’s how:
1. Press the WRITE button to display the Write Menu screen.
Notice that “Pattern” is highlighted on the screen. Since we’re currently in Pattern mode, the
MC-909 assumes you want to save a pattern. Whenever you press WRITE, the MC-909 selects
whatever it is you’re working on for you in its Write menu. You can always select something else
to save by turning the VALUE dial or pressing the desired F button, but you don’t need to do
that now. We do want to save a pattern.
2. Press ENTER to confirm that you want to write a pattern.
To Next Page
Loading...
