Roland Micro Cube Bass-RX Training Guide
3. Play some bass lines.
4. Experiment with the EQUALIZER, EFX, and DELAY/REVERB to check
out their sounds.
5. Try some other AMP types.
STEP THREE-Show the RHYTHM GUIDE
1. Turn the PATTERN knob and press the VARIATION button to select a
RHYTHM GUIDE pattern such as ROCK 1 Red or FUNK.
2. Set the RHYTHM GUIDE VOLUME to about 5.
3. Tap the TAP TEMPO button at least twice to set the pattern tempo
4. Press START/STOP to play the pattern
5. Play a bass line over the drum pattern
6. Press START/STOP when you are finished.
To Next Page
Loading...
