5-4 Specifications
Chapter 5 Appendix
47
Expansion Connector Specification
+24V
100Ω / 2W
Terminals
If (max) = 1A
Ic (max) = 150mA
Compatible plug
Use only a triple-contact plug of the
size described above.
This circuit is activated when the spindle motor is in operation.
About expansion connector specification
➢
Use within the rated range shown above.
➢
Do not apply voltage greater than 24 V to the terminal.
➢
Do not short the terminal to ground.
About compatible plug
Do not use terminal ➂. Use only terminals ➀ and ➁.
No responsible is assumed for effects to which any equipment connected to this external output connector is
subjected.
No responsible is assumed for malfunction when using any equipment connected to this external output connec-
tor is subjected.
To Next Page
Loading...