To Ensure Safe Use
6
Important Notes on Cutting
WARNING
Never use an air gun (blower) to remove
cuttings.
Using an air gun (blower) may blow cuttings in-
side the machine, creating a fire hazard.
CAUTION
Do not touch the tip of the cutting tool
with your fingers.
Doing so may result in injury.
Perform dry cutting with no cutting oil.
Such materials can cause fire.
When you're finished, wash your hands to
rinse away all cuttings.
Do not touch the spindle motor immedi-
ately after a cutting operation has ended.
Doing so may result in burns.
To Next Page
Loading...