120
Using effects
This chapter explains how to apply and edit the effects.
Switching the effects on/off
Each of the MV-8000's internal effects can be switched on or off. You can switch the
effects off if you're editing a sound and want to hear it without effects, or if you want
to use an external effect processor instead of the built-in effects.
1.
Press .
The
EFFECTS screen
(p. 372) will appear.
2.
Use (up/down) to move the cursor to the effect you want to switch
on/off. This effect becomes the “current effect.”
There are three effects. The effect you select is enclosed in a frame and highlighted.
3.
Press (FX On/Off).
Each time you press this, the current effect will be switched on or off.
For details on the
MV-8000's built-in effects,
refer to Effect section (p.
23).
The effect on/off settings are
remembered for each song.
ECS05_manual_e.book 120 ページ ２００５年１１月３０日 水曜日 午前１１時１４分
To Next Page
Loading...
