141
Project and disk management
Project and disk managementCreating an audio CD Using the MV8-OP1 (Audio I/O
Expansion) to connect external devices
Using data of other formats Using the MV-8000 with MIDI or V-LINK
devices
3.
Move the cursor to the project that you want to backup, and press
(Execute).
Starts backup to CD-R/RW disc.
Restoring a project from a CD-R/RW disc
Here's how a project that was backed-up to a CD-R/RW can be restored to the hard
disk.
1.
Press .
The
PROJECT MENU screen
(p. 308) will appear.
2.
With the cursor located in the lower row of icons, press (Recover).
Alternatively, select the RECOVER FROM CD icon and press .
The
RECOVER PROJECT FROM CD popup
(p. 318) will appear. Displays a project
name on CD-R/RW disc
3.
Specifies the “New Project on Hard disk” parameter for the recovered project
you want to recover.
By default, the project will be recovered with the name that is stored on the CD-R/RW
disc. If you want to recover the project as a different name, change the name.
4.
Press (Execute).
Recovery will begin. When the project has been recovered, it will be saved on the hard
disk, and the backup CD will be ejected.
Input a name for the new
project you want to create.
For details on inputting
text, refer to Quick Start
Inputting text (p. 9).
In order to use the recovered
project, load the project as
described in Loading a
project (p. 136).
ECS05_manual_e.book 141 ページ ２００５年１１月３０日 水曜日 午前１１時１４分
To Next Page
Loading...
